6 7
2. Initial Settings
When the camera is powered up for the rst time, please set the display language and date
& time.
Setting the Language
Use the 4-way navigation control to move through the selections.1.
Highlight the desired language and press the 2. OK button to select.
Setting the Date & Time
Use the 4-way navigation control to move through the 1.
selections and to change the setting values.
Press 2. OK button when finished. This will save your date and time settings.
If necessary, press 3. Menu button to close the menu.
At this point, the camera settings are set to the default automatic mode and is ready to
take photos and videos.
To Next Page
Loading...
Need help?
General
