Bottom components
Component Description
(1) Battery bay Holds the primary battery.
(2) Battery release latch Releases the battery from the battery bay.
(3) Hard drive bay Holds the hard drive.
(4) Vent Enables airflow to cool internal components.
CAUTION: To prevent overheating, do not block vents. Use the
computer only on a hard, flat surface. Do not allow another hard
surface, such as an adjoining optional printer, or a soft surface,
such as pillows or thick rugs or clothing, to block airflow.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
(5) Memory module compartment Contains the memory module slots.
10 Chapter 2 Components
To Next Page
Loading...
Need help?
General