Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part
number 443905-001. There are 8 rubber feet in 2 different sizes. The feet attach to the base enclosure
in the locations illustrated below.
Bluetooth module
Description Spare part number
For use with computer models in all countries and regions except Japan and Asia/Pacific (includes
Bluetooth module cable)
398393-002
For use with computer models in Japan and Asia/Pacific countries and regions (includes Bluetooth
module cable)
450066-001
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 52).
Remove the Bluetooth® module:
1. Position the computer with the front toward you.
2. Loosen the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module cover to the computer.
58 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
Need help?
General
Weight and Dimensions
