HP COMPAQ 8000 User Manual

Removing a Bezel Blank
On some models, there is a bezel blank covering the external drive bay that needs to be removed before
installing a drive. To remove a bezel blank:
1. Remove the front bezel.
2. Push the two retaining tabs that hold the bezel blank in place towards the outer left edge of the
bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 2-6 Removing a Bezel Blank
ENWW Removing a Bezel Blank 13

HP COMPAQ 8000 Specifications

General

Brand	HP
Model	COMPAQ 8000
Category	Desktop
Language	English