6 Computer Setup Utility Guide
Computer Setup (F10) Utility
Advanced CMOS Setup
(Continued)
Internal Graphic Mode
Select
Selects the size of memory for internal
graphic adapter.
• Disabled: Internal Graphic Mode
Select disabled.
• 1MB:Share 1MB
• 4MB: Share 4MB
• 8MB: Share 8MB (Default)
• 16MB: Share 16MB
• 32MB: Share 32MB
Boot Device Priority Specifies the Boot Device Priority
sequence.
Power Management
Setup
ACPI Standby State Sets the ACPI Standby State when system
goes into ACPI Standby Mode.
• S1/PSOS: Power on Suspend
• S3/STR: Suspend to RAM (Default)
Restore on AC/Power
Loss
Sets the system status after AC power
loss.
• Power Off: System always Powers
Off (Default)
• Power On: System always Powers On
• Last State: System returns to the last
state before AC power loss
Resume On Ring Sets the Resume On Ring from soft off.
• Disable: Ring Resume disable
(Default)
• Enable: Ring Resume enable
Computer Setup (Continued)
Heading Option Description
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
To Next Page
Loading...
Need help?
General