6–12 Maintenance and Service Guide
Removal and Replacement Procedures
6.7 Memory Module
1. Prepare the notebook for disassembly (refer to Section 6.3).
2. Position the notebook with the rear panel toward you.
3. Loosen the 2 Phillips PM2.5×6.0 screws 1 that secure the
memory module compartment cover to the notebook.
4. Lift the rear edge of the cover up and swing it toward you 2.
5. Remove the memory module compartment cover.
✎
The memory module compartment cover is included in the
Miscellaneous Plastics Kit, spare part number 393593-001.
Removing the Memory Module Compartment Cover
Memory Module Spare Part Number Information
1024 MB
512 MB
256 MB
393573-001
393572-001
393571-001
To Next Page
Loading...
Need help?
General
