HP watermark and image retention policy
The IPS monitor models are designed with IPS (In-Plane Switching) display technology which provides ultra-
wide viewing angles and advanced image quality. IPS monitors are suitable for a wide variety of advanced
image quality applications. This panel technology, however, is not suitable for applications that exhibit static,
stationary or fixed images for long periods of time without the use of screen savers. These types of
applications may include camera surveillance, video games, marketing logos, and templates that are
displayed on the screen for a prolonged period of time. Static images may cause image retention damage
that could look like stains or watermarks on the monitor's screen.
Monitors in use for 24 hours per day that result in image retention damage are not covered under the HP
warranty. To avoid image retention damage, always turn off the monitor when it is not in use or use the
power management setting, if supported on your system, to turn off the display when the system is idle.
Connecting USB devices
USB connectors are used to connect devices such as a digital camera, USB keyboard, or USB mouse. Two USB
connectors are located on the side panel of the monitor.
NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports
on the monitor. Refer to Step 4 in
Connecting the cables on page 8.
HP watermark and image retention policy 17
To Next Page
Loading...
Need help?
General
