Setup Utility 5–3
Closing the Setup Utility
You can close the Setup Utility with or without saving changes.
■ To close the Setup Utility and save your changes from the current session, use either of the
following procedures:
❏ Press f10, and then follow the instructions on the screen.
– or –
❏ If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to
select Exit > Exit Saving Changes, and then press
enter.
When you use the
f10 procedure, you are offered an option to return to the Setup Utility. When you use the
Exit Saving Changes procedure, the Setup Utility closes when you press
enter.
■ To close the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press
esc to return to the menu display. Then use the arrow keys to
select Exit > Exit Discarding Changes, and then press
enter.
After the Setup Utility closes, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎
Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.
Main menu
Security menu
Select To do this
System information ■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size, system
BIOS, and keyboard controller version (select models only).
Select To do this
Administrator password Enter, change, or delete an administrator password.
Power-On Password Enter, change, or delete a power-on password.
To Next Page
Loading...
Need help?
General
