HP iPAQ User Guide

4 www.hp.com User’s Guide
Setting Up the Bluetooth GPS Receiver
The Navigation System requires set up with the Bluetooth GPS receiver in order to operate. For
the initial set up, do the following:
1. Charge the Bluetooth GPS receiver using the DC adapter (included) or the AC adapter for the
HP iPAQ PocketPC.
✎
Note: The first time you charge the Bluetooth GPS receiver, it can take up to three hours.
2. Turn on the Bluetooth GPS receiver using the Power switch on the left side of the receiver.
✎
Note: The blue LED flashes when the receiver is turned on.
Manually Partnering for Windows
®
Mobile 2002
Operating System
✎
Note: Some devices require you manually partner the Bluetooth GPS receiver and the iPAQ
PocketPC. This includes devices using Microsoft
®
Windows Pocket PC 2002 operating system.
For more information, refer to the Manually Partnering the Bluetooth GPS Receiver and the
iPAQ PocketPC section.
To partner the Bluetooth GPS receiver with the iPAQ PocketPC requires:
■ Navigation System software installed on your iPAQ PocketPC.
■ Bluetooth GPS receiver is charged.
■ iPAQ PocketPC is turned on.
■ Bluetooth GPS receiver is turned on.
■ Bluetooth GPS receiver and iPAQ PocketPC are between 5-10 meters apart.
Establishing a Connection
1. Tap Start at the top of the Today screen on the iPAQ PocketPC.
2. Tap Bluetooth Manager from the pop up menu.
The Bluetooth Manager screen displays.

HP iPAQ Specifications

General

Brand	HP
Model	iPAQ
Category	Handhelds
Language	English