To Next Page

To Previous Page

HP L1702

3. Operation Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front of the panel.

By changing these settings, the picture can be adjusted to your personal performance.

The power cord should be connected and insert to adaptor.

Connect the video cable from the monitor to the computer VGA card.

- Press the power button to turn on the monitor, the power indicator will light up to Green.

3.2 Control Buttons

- Power Button:

When pressed, the monitor enters the off mode, and the LED turns blank. Press again to restore normal status.

- (Down/ Auto) and + (Up) Button:

The -/+ Button is browse OSD key. Press a select into adjustment.

The Auto Adjust Key is used to automatically set the H Position, V Position, Clock and Phase.

- Select Key:

Select key is into OSD sub-menu hot key when OSD turn on.

- Power Indicator:

Green — Power On mode.

Amber — Power Saving mode.

Blank — Power Off Mode.

HP L1702 User Manual

Questions and Answers: