HP M330 Dual Radio 802.11ac Access Point Quick Start Guide
This guide shows you how to install and get started using the HP M330 Dual Radio 802.11ac Access Point, hereafter referred to as the M330. (See Products list on
page 6 for part numbers.)
The latest documentation, including the HP M330 Dual Radio 802.11ac Access Point Configuration/Administration Guide, is available at
www.hp.com/support/manuals.
The M330 Access Point is an IEEE 802.11a/b/g/n/ac, dual-radio, high-speed access point (AP) that provides simplified wireless LAN administration with clustering
technology.
Hardware overview
Package contents
The M330 AP, four mounting screws with wall anchors, four rubber feet,
mounting bracket, two T-bar clips, AC/DC power adaper, and documentation.
Ports
One Gigabit Ethernet port: Auto-sensing 10/100/1000. Supports powering of
the M330 with 802.3af Power over Ethernet (PoE) or 802.3at PoE+.
Radio and antennas
The M330 provides dual radios (2.4 GHz and 5 GHz) with three antennas per
radio supporting 3x3 MIMO three-spatial-stream 802.11n and 802.11ac. The
M330 supports 802.11b/g/n operation modes at 2.4 GHz and 802.11a/n/ac
operation modes at 5 GHz. The M330 supports concurrent operation at 2.4 GHz
and 5 GHz.
4
5
7
1
2
3
6
Front-bottom view
4: Power LED 6: 2.4 GHz LED
5: LAN port LED 7: 5 GHz LED
Front-top view
1: Power jack 3: Reset button
2: LAN port
The HP M330 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11a/b/g/n/ac product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
To Next Page
Need help?
General
