Table 1. (Continued) Key features for F10 Setup on select 2008 HP business notebook PCs
Feature Function
Options (Default in Bold where
applicable)
SYSTEM CONFIGURATION MENU
Active Management
Technology (AMT) Options
(Displayed on Intel
notebooks)
Firmware Verbosity Display AMT text during POST.
Enabled/Disabled
AMT Setup Prompt Prompts for AMT setup during POST.
Enabled/Disabled
USB Key Provisioning Allow AMT provisioning using USB
disk on key.
Enabled/Disabled
Unconfigure AMT on next
boot
Reset AMT configuration options on
next boot.
Enabled/Disabled
Terminal Emulation Mode Specify terminal emulation mode.
ANSI/VT100
Firmware Progress Event
Support
Enabled/Disabled
Include TYPE-131 in
SMBIOS
Enabled/Disabled
Set Security Level Allows administrator to restrict visibility or configurability of F10 Setup
options for standard users