HP OMEN 32c User Manual

17
3) Lift the HDMI 2 connector from the circuit board.
4) Place the new component on the circuit board. Be sure that it matches the footprint.
5) Solder the new component.
DP connector CN503
Repair the DP connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the DP connector from the circuit board.
4) Place the new component on the circuit board. Be sure that it matches the footprint.
5) Solder the new component.
Phone Jack connector CN601
Repair the Phone Jack connector:
1） Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the Phone Jack connector from the circuit board.

HP OMEN 32c Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	32 inches
Panel Type	not applicable
Aspect Ratio	16:9
Resolution	2560 x 1440
Native Resolution	2560 x 1440
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	3000:1
Synchronization	freesync (amd adaptive sync)
HDR	no
Built-In Speakers	no
HDMI Ports	2
Power Saving Mode	0.5 watts
Power Consumption	72 watts
Depth with Stand	7 inches
Width with Stand	29.1 inches
Net Weight without Stand	21.56 pounds