EL-MF877-00 Page 2
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Quantity of
items
included in
product
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing refractory
ceramic fibers
Components, parts and materials containing
radioactive substances
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Size (if
applicable)
Description #1 SCREW DRIVER(PHILLIPS HEAD)
Description #2 SCREW DRIVER(WAHSER HEAD)
Description #3 SCREW DRIVER(HEX HEAD)
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Remove cable from Display head
2. Remove Stand Base From Display Head
3. Remove Rear Cover From Display Head
4. Remove Aluminum Foil
5. ReRemove Bracket Assembly From Display Head
6. Remove Middle Cover From Display Head
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).