5
Using the Setup Menu
The Setup Menu allows you to set preferences for the camera’s behavior.
1.
While in Live View or Playback, press
, then use to highlight .
2.
Use
to highlight a menu option, then press to display the menu option’s
sub-menu.
3.
Use
to highlight a setting, then press .
4.
To exit the Setup Menu, press
.
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
● Low—For extending battery life.
● Medium (Default)—For normal viewing conditions.
● High—For very bright lighting conditions.
Camera Sounds—Turns the camera sounds (such as button presses and
shutter clicks) off and on.
On (Default), Off.
Date & Time—Sets the date and time. See Set the date and time
on page 7.
USB Configuration—Specifies how a computer recognizes the camera. See
Connecting to the computer on page 18.
● Digital Camera (Default)—Recognizes the camera as a digital camera
using PTP (Picture Transfer Protocol).
● Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass
Storage Device Class).
(Language)—Sets the language. See Choose the language
on page 7.
About...—Provides information about the camera, including copyright, serial
number, and firmware version.
20
To Next Page
Loading...
Need help?
General
