Index-1
Index
B
basic troubleshooting tips … 4-1
blinking LEDs
error indications … 4-2–4-3
C
cabinet
mounting the switch in … 2-6, 2-9
cables
connecting cables to switch ports … 2-10–2-11
infrastructure requirements … 2-3
cabling infrastructure … 2-3
connecting the switch to a power source … 2-10
connector specifications … A-2
D
description
LEDs … 1-2
switch … 1-1
E
electrical specifications, switch … A-1
EMC regulatory statements … B-8
environmental specifications, switch … A-1
H
horizontal surface
mounting switch on … 2-10
I
included parts … 2-1
installation
connecting the switch to a power source … 2-10
horizontal surface mounting … 2-10
location considerations … 2-4
network cable requirements … 2-3
precautions … 2-2
rack or cabinet mounting … 2-6, 2-9
site preparation … 2-3
L
LEDs
behavior during self test … 2-5
descriptions of … 1-2
error indications … 4-2–4-3
LED Mode View select indicators … 1-2
Power … 1-2
behavior during self test … 2-5
location for the switch, considerations … 2-4
M
mounting the switch
in a rack or cabinet … 2-6, 2-9
precautions … 2-2
on a horizontal surface … 2-10
N
network cables
required types … 2-3
network devices
connecting to the switch … 2-10–2-11
network ports
connecting to … 2-10–2-11
standards compliance … A-2
P
parts, included with the switch … 2-1
physical specifications, switch … A-1
port LEDs
normal operation … 2-5
ports
10/100Base-TX, location on switch … 1-1
connecting to … 2-10–2-11
network connections … 2-10–2-11
Power LED … 1-2
behavior during self test … 2-5
behaviors … 1-2
power source
connecting the switch to … 2-10
Index
To Next Page
Need help?
General
