Rear of rack (cont.)
Installing the UPS in the rack
Before installing the UPS, review and adhere to all safety information (see page 2 and page 3). The mounting rails
must be installed before installing the UPS.
Warning: A risk of personal injury or damage to the equipment exists. Uneven loading of
equipment in the rack might cause the rack to become unstable. Install the heavier components
rst, and then continue to populate the rack from the bottom to the top.
M6 screws
E
Tighten the wing nuts or hex
nuts.
A
Install the mounting ears on the
chassis using the provided screws.
B
Install the UPS chassis in the rack.
1. With one person on each side,
lift the chassis to rail level and
slide the chassis on the mount-
ing rails.
2. Attach the chassis to the rack
using the provided screws.
E
3. Installation
B
A
To Next Page
Loading...
Need help?
General
