HP StorageWorks MSL2024
Tape Library getting started
© Copyright 2010 Hewlett-Packard Development Company, L.P.
Seventh edition: March 2010
The information in this document is subject to change without notice.
Printed in the US
www.hp.com
*AK378-96028*
IMPORTANT:
The shipping lock must be removed for the robotics to work
properly. A robot move error is displayed if the shipping lock
is not removed. See Step 1, Removing and storing the shipping
lock.
WARNING!
The Library weighs 15.6 kg (34.3 lb) without media and 20.4
kg (44.9 lb) with media (24 cartridges). When moving the
Library, to reduce the risk of personal injury or damage to the
device:
• Observe local health and safety requirements and guidelines
for manual material handling.
• Remove all tapes to reduce the overall weight of the device
and prevent cartridges from falling into the robotic path and
damaging the Library.
• Obtain adequate assistance to lift and stabilize the device
during installation or removal.
WARNING!
When placing the Library into a rack, to reduce the risk of
personal injury or damage to equipment:
• Extend the rack leveling jacks to the floor.
• Ensure that the full weight of the rack rests on the leveling jacks.
• Install stabilizing feet on the rack.
• Extend only one rack component at a time. Racks may become
unstable if more than one component is extended.
Front panel overview
2. Mailslot1. Power button
4. LCD screen3. LEDs
6. Air vents5. Control keys
7. Magazines
Page 1
To Next Page
Need help?
General