Table 25 Error codes (part code 1005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563011005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563021005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563031005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571011005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571021005
WWait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while connecting to
the storage system.
585721005
ECheck if the DKCMAIN and SVP
microcode versions are mismatched.
This function is not supported.585731005
WWait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while connecting to
the storage system.
585741005
WWait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while connecting to
the storage system.
585751005
WWait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
A communication time-out error occurred
in the storage system.
585761005
WAssociate the Thin Provisioning volume
with a pool, then retry the operation.
The Thin Provisioning volume is not
associated with a pool.
656601005
WCheck the settings, then retry the
operation.
The selected WWN has been registered
in a host group.
750091005
Part code 01022
Table 26 Error codes (part code 01022)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the check boxes for the items that
you want to change, then retry the
operation.
All the check boxes are cleared.10500901022
WEnter the host group name from 1 to 64
characters.
The host group name is not set.10501001022
WEnter the host group name from 1 to 64
characters.
The number of characters specified in
the host group name has exceed the
maximum.
10501101022
60 Message (part code group 1nnn)