HP t100 Hardware Reference Guide

D HP MultiSeat Thin Client t100 Operation
Routine HP MultiSeat Thin Client t100 Care
Use the following information to properly care for the HP MultiSeat Thin Client t100:
●
Never operate the HP MultiSeat Thin Client t100 with the outside panel removed.
●
Keep the HP MultiSeat Thin Client t100 away from excessive moisture, direct sunlight, and extreme
heat and cold. For information about the recommended temperature and humidity ranges for the
HP MultiSeat Thin Client t100, see
Specifications on page 4.
●
Keep liquids away from the HP MultiSeat Thin Client t100.
●
Turn off the HP MultiSeat Thin Client t100 and wipe the exterior with a soft, damp cloth as needed.
Using cleaning products may discolor or damage the finish.
Supported Orientations
HP supports the following orientations for the HP MultiSeat Thin Client t100.
CAUTION: You must adhere to HP-supported orientations to ensure your HP MultiSeat Thin Client
t100 functions properly.
●
If the HP MultiSeat Thin Client t100 is not to be mounted, only the horizontal orientation is
supported. Be sure to set the HP MultiSeat Thin Client t100 on its rubber feet.
Figure D-1 Horizontal orientation
●
You can lay the HP MultiSeat Thin Client t100 under a monitor stand with at least one inch of
clearance.
14 Appendix D HP MultiSeat Thin Client t100 Operation ENWW

HP t100 Specifications

General

Brand	HP
Model	t100
Category	Server
Language	English