HP T200 Quick Start Guide

English
1
1. Getting Started
Open the battery cover
Follow u to push in and up the battery cover.
Follow v to lift the cover.
Load the rechargeable Li-ion battery
Insert the battery according to the correct polarity marks
(+ or -).
Close the battery cover firmly.
1
2
Recommended memory capacity of SD card (Not Included): 1GB or above.
Li-ion battery
Insert the SD card (Optional) into the slot. To remove the SD
card, press it down and take it out.
Charge your battery
You must use the supplied adaptor or the USB cable.
The camcorder must be turned OFF. A blinking light conrms charging, and the light becomes constant
when the charging has been completed.
In AC charging mode, the light will turn itself off automatically after a short time. The full charge time is
about 3 to 4 hours. (Actual charging time may vary depending on the condition of the battery)

HP T200 Specifications

General

Motherboard chipset	-
Processor frequency	- GHz
Internal memory	- GB
Memory clock speed	1333 MHz
Internal memory type	DDR3-SDRAM
Display included	No
Audio system	Stereo audio
Microphone in	Yes
USB 2.0 ports quantity	4
Ethernet LAN (RJ-45) ports	1
Power supply	3 W
Storage media	HDD
Storage drive interface	Serial ATA
Maximum resolution	2048 x 1152 pixels
Cabling technology	10/100/1000Base-T(X)
Operating system installed	Windows MultiPoint Server 2011
Product color	Black
Sustainability certificates	RoHS, EPEAT Silver, ENERGY STAR
Country of origin	China

Weight and Dimensions

Depth	91 mm
Width	136 mm
Height	35 mm
Weight	343 g