HP V27i User Manual

18

Function test
After repair, be sure to confirm that all functions are working.
Support and troubleshooting
The following table lists possible problems, the possible cause or each problem, and the recommended
solutions.
Table 4-1: Function test
Test item Operating description Tool used
HDMI test Confirm whether image displays and sound
plays correctly on the monitor.
Computer or DVD player
VGA test Confirm whether image displays and sound
plays correctly on the monitor.
Computer
Table 4-2: Solving common problems
Problem Possible cause Solution
Screen is blank
or video is
flashing.
Power cord is disconnected. Connect the power cord.
Monitor is off. Power the power button.
NOTE: If pressing the
Power button has no
effect, press and hold the
power button for 10
seconds to disable the
Power button lockout
feature.
Video cable is improperly connected. Connect the video cable
properly.
System is in Sleep mode. Press any key on the
keyboard or move the
mouse to exit Sleep mode.
Video card is incompatible. Open the OSD menu and
select the Input Control
menu. Set Auto-Switch
Input to Off and manually
select the input
Image appears
blurred,
indistinct, or too
dark.
Brightness is too low. Open the OSD menu and
select Brightness to
adjust the brightness scale
as needed.
Check Video
Cable is
displayed on
Monitor video cable is disconnected. Connect the appropriate
video signal cable
between the computer and

HP V27i Specifications

General

Color gamut	72 %
Pixel pitch	0.311 x 0.311 mm
Screen shape	Flat
Pixel density	81 ppi
Display diagonal	27 \
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	50 - 60 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	30 - 80 kHz
Contrast ratio (typical)	1000:1
Display number of colors	-
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
Certification	Australian-New Zealand MEPS; BIS; BSMI; CB; CCC; CE; CECP; CEL; C-Tick; cTUVus; EAC; Energy Star; E-standby; EUP Lot-5; EUP Lot-6; FCC; ISO 9241-307; KC/KCC; NOM NYCE; PSB; SEPA; TCO Certified; TUV Bauart; VCCI; Vietnam MEPS; WEEE; ISC; Low blue light; UkrSEPRO; South Africa MEPS; Ukraine Energy label; California Energy Commission (CEC); WW application; ICE; Mexico MEPS; TGM; Japan PC Green Label
Product color	Black
Country of origin	China
Market positioning	Home
Sustainability certificates	ENERGY STAR
HDMI	Yes
HDMI version	1.4
USB hub version	3.2 Gen 1 (3.1 Gen 1)
DisplayPorts quantity	0
USB Type-A downstream ports quantity	3
Tilt angle range	-5 - 20 °
Panel mounting interface	100 x 100 mm
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Package type	Box
Package depth	128 mm
Package width	675 mm
Package height	425 mm
Package weight	5700 g
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	28 W
Cables included	AC, HDMI
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	200.1 mm
Height (with stand)	447.7 mm
Weight (with stand)	4500 g
Depth (without stand)	47.7 mm
Width (without stand)	612.2 mm
Height (without stand)	367.7 mm