HTW RG10 Series User Manual

08
1
3
2
1. Press the MODE button to select AUTO.
Press the MODE button to select FAN mode.
2. Set your desired temperature using the TEMP
or TEMP button.
3.
Press the ON/OFF button to start the unit.
Press the ON/OFF button to start the unit.
Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
Set your desired temperature using the
TEMP or TEMP button.
Press the ON/OFF button to start the unit.
1.
Press the MODE button to select HEAT
mode.
2.
3.
Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
4.
4
1
3
2
1
3
2
DRY Mode (dehumidifying)
NOTE: FAN SPEED cannot be changed in DRY
mode.
HEAT Mode
NOTE: As outdoor temperature drops, the
performance of your unit’s HEAT function may
be affected. In such instances, we recommend
using this air conditioner in conjunction with
other heating appliances.
FAN Mode
1.
2.
3.
NOTE: You can’t set temperature in FAN mode.
As a result, your remote control’s LCD screen
will not display temperature.

HTW RG10 Series Specifications

General

Brand	HTW
Model	RG10 Series
Category	Remote Control
Language	English