Huawei AP6050DN User Manual

AP6050DN&AP6150DN
Product Description
3 Product Features (in Fat AP and Fit AP Modes)
Issue 01 (2016-05-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17

Multi-user CAC
3.2 Network Features
Network features supported by the AP are as follows:

Compliance with IEEE 802.3u

Auto-negotiation of the rate and duplex mode and automatic switchover between the
Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)

Compliance with IEEE 802.1q

SSID-based VLAN assignment

VLAN trunk on uplink Ethernet ports

Management channel of the AP uplink port in tagged and untagged mode

DHCP client, obtaining IP addresses through DHCP

Tunnel data forwarding and direct data forwarding

STA isolation in the same VLAN

Access control lists (ACLs)

Link Layer Discovery Protocol (LLDP)

Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode

Unified authentication on the AC in Fit AP mode

AC dual-link backup in Fit AP mode

Network Address Translation (NAT) in Fat AP mode

IPv6 in Fit AP mode
3.3 QoS Features
QoS features supported by the AP are as follows:

Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding

WMM parameter management for each radio

WMM power saving

Priority mapping for upstream packets and flow-based mapping for downstream packets

Queue mapping and scheduling

User-based bandwidth limiting

Adaptive bandwidth management (automatic bandwidth adjustment based on the user
quantity and radio environment) to improve user experience
3.4 Security Features
Security features supported by the AP are as follows:

Open system authentication

Huawei AP6050DN Specifications

General

Brand	Huawei
Model	AP6050DN
Category	Wireless Access Point
Language	English