EasyManuals Logo

Huawei E3372h-320 User Manual

Huawei E3372h-320
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Green, blinking once every 2s: The 2G network has already been registered.
Blue, blinking once every 2s: The 3G /3G+ network has already been registered.
Cyan, blinking once every 2s: The LTE network has already been registered.
Green, solid: The USB Stick is connected to a 2G network.
Blue, solid: The USB Stick is connected to a 3G network.
Cyan, solid: The USB Stick is connected to an LTE network.
Off: The USB Stick is removed.
After the device is inserted into the USB port, the indicator will turn solid green, indicating that
the software startup process has initiated. After the startup is complete, the indicator works as
detailed above.
SIM Card Slot
It holds a Subscriber Identity Module (SIM) card.
Getting Your USB Stick Ready
1 Slide the cover to remove it from the USB Stick.
2 Insert the SIM card into the corresponding card slots, as shown in the following figure.
3 Replace the cover and slide it into place.
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei E3372h-320 and is the answer not in the manual?

Huawei E3372h-320 Specifications

General IconGeneral
Device typeCellular network modem
Product colorWhite
Market positioningPortable
Ethernet LANNo
4G standardLTE-FDD
2G standardsEDGE, GSM
3G standardsDC-HSPA+, HSUPA, UMTS
Data networkEDGE, GSM, HSUPA, LTE, UMTS
2G bands supported850, 900, 1800, 1900 MHz
3G bands supported900, 2100 MHz
4G bands supported800, 900, 1800, 2100, 2600 MHz
Power source typeUSB
Antenna typeExternal
Antennas quantity2
Antenna connector typeTS-5
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth11.5 mm
Width88 mm
Height28 mm
Weight35 g

Related product manuals