8
Logging in to the web UI.
The web UI utility is accessed via a browser and is used to perform
advanced device configuration and function management.
Follow these steps to log in to the web UI:
1. Ensure the WiFi Cube is connected to your computer, smartphone or
tablet.
2. Open a browser and enter http://192.168.8.1 in the address box.
Note:
The WiFi Cube's default IP address is 192.168.8.1 and the subnet
mask is
255.255.255.0.
It’s recommended that you use the automatically obtained IP
addresses and domain name system (DNS) server. Otherwise you may
not be able to log in to the web UI.
3. Enter the user name and password to log in.
Note:
The default user name and password are printed on the WiFi Cube
label which can be found under the device.
To Next Page
Loading...
Need help?
General
