3 Indicator Description
Indicator Status Description
Power Steady on The ONT is powered on.
O The power supply is cut o.
PON/LOS See the following table.
LAN1-
LAN4
Steady on The Ethernet connection is in the normal
state.
Blinking Data is being transmitted over the Ethernet
port.
O The Ethernet connection is not set up.
TEL Steady on The ONT is registered with the softswitch but
no service ows are transmitted.
Blinks twice a
second
The ONT is registered with the softswitch,
and data is being transmitted on the port.
Blinks once every
2 seconds
The ONT fails to be registered with the
softswitch.
O The POTS port is disabled.
WLAN Steady on The WLAN function is enabled.
Blinking Data is being transmitted over the WLAN
port.
O The WLAN function is disabled.
WPS Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
EchoLife EG8143A5
Quick Start for QR code (5dBi) 3 Indicator Description
Issue 01 (2020-07-08) Copyright © Huawei Technologies Co., Ltd. 5
To Next Page
Loading...
Need help?
General
