20
10Wireless Data Service
Installing Management
Program
This section introduces how to install the manage-
ment program and the hardware driver. The proce-
dures are for your reference only.
This takes the Windows XP operating system (OS)
as an example to describe how to configure your
computer. For other OSs, the configurations may be
different and you need to configure them as required.
Note
The operating system configuration require-
ment of a PC: Windows 2000, Windows XP,
Vista (32-bit or 64 bit).
1 Use the USB cable to connect the FWT and a
PC.
2 The system finds the new hardware and installs
the modem driver automatically.
3 The setup program automatically starts. Then,
the installation interface appears.
Note
• If the above interface doesn’t appear,
restart the FWT.
• Still if the setup program doesn’t run
automatically then double click the"FWT
connect" CD ROM appear in My Com
-
puter.
4 According to the instructions, click Next to pro-
ceed.
5 Read License Agreement carefully. Then select I
Agree and click Next.
6 Select an installation path and click Next.
Note
If you do not select a path, the default
path is used. You can click Browse… to
change the path.
7 In the Folder text box, enter the name. Then click
Next.
8 If a prompt indicating that the software has not
passed Windows Logo testing is displayed, click
Continue Anyway to proceed.
To Next Page
Loading...
Need help?
General
