If you restore the HG532s to its default settings, all customized
user data will be lost. Use this function only when necessary.
To restore the HG532s to its default settings, power on the HG532s, press and
hold the Reset button on the rear panel for over 6 seconds, and then release
the button.
You can also do the following to restore the HG532s to its default settings from
the web-based configuration utility:
Step 1 Log in to the HG532s's web-based configuration utility.
Step 2 Choose Maintenance > Device.
Step 3 Click the Reset tab.
Step 4 Click Restore Default Settings.
Step 5 In the displayed dialog box, click OK.
After the preceding steps, the login page is displayed. You can enter the default
user name (user) and password (user) to log in.
To Next Page
Loading...
Need help?
General