3
1.2 Connecting Cables Using the WAN Port
Connecting Cables
If there is at least one available Ethernet wall jack in your home, you can go
online using the Ethernet service.
HG630a
Getting Started
After connecting the cables, press the On/Off button on the side panel to power
on the HG630a.
After you power on the HG630a, the Power indicator turns on, the WAN
indicator turns on. This indicates that the HG630a is working properly. When the
WAN indicator starts blinking, data is being transmitted between the HG630a
and the connected device.
To Next Page
Loading...
Need help?
General
