6
3.2 Setting up a Wireless Connection Manually
Besides using the WPS button, you can also set up a wireless connection
manually.
The following example uses a computer running the Windows XP operating
system to describe how to set up a wireless connection using the
default wireless network name and password:
1. Find the wireless network name (SSID) and its password (WLAN Key)
printed on the label of the HG658c's rear panel.
2. Start the wireless configuration service of the Windows XP operating
system as follows:
1) Right-click My Computer to display a short-cut menu, and then choose
Manage.
2) In the Computer Management window, choose Computer
Management (Local) > Services and Applications > Services.
3) Right-click Wireless Zero Configuration to display a shortcut menu,
and then choose Properties.
4) Check that Service status is Started. If Service status is not Started,
click Start.
5) Click OK to close the dialog box, and the close the Computer
Management window.
3. Configure the wireless network connection on the computer as follows:
1) Choose Start > All Programs > Accessories > Communications >
Network Connections.
2) In the Network Connections window, right-click Wireless Network
Connection to display a shortcut menu, and choose Properties.
3) In the Wireless Network Connection Properties dialog box, click the
Wireless Networks tab.
4) Select Use Windows to configure my wireless network settings.
5) Click View Wireless Networks.
To Next Page
Loading...
Need help?
General
