14
If the WAN indicator is still off, contact your network service provider.
3. Check that you have entered the correct user name and password.
4. The user name and password are provided by your network service
provider. To check the user name and password, see section 0“
Configuring Internet Access Parameters”.
5. Check whether the LAN indicator is on.
If the LAN indicator is off, perform further checks as follows:
1) Check that the network adapter on your computer is enabled.
2) Check that the network cable between the HG658c and the computer
is securely connected. Remove and then insert the network cable or
replace the network cable when necessary.
If the LAN indicator is still off, contact an authorized maintenance
center.
6. Check that the driver for the network adapter is correctly installed. The
following example uses a computer running the Windows XP operating
system to check whether the driver for the network adapter is installed:
1) Right-click My Computer, and choose Manage from the displayed
shortcut menu.
2) In the Computer Management window, click Device Manager.
3) In the right pane of the Computer Management window, click
Network adapters.
If no network adapter is found or if a question mark (?) or an
exclamation mark (!) is displayed next to the network adapter icon, the
driver for the network adapter is not correctly installed. Re-install the
driver.
7. Check that the proxy server of the browser is correctly configured. The
following example uses Internet Explorer on the Windows XP operating
system to check whether the proxy server of the browser is correctly
configured:
1) Launch Internet Explorer.
2) Choose Tools > Internet Options.
To Next Page
Loading...
Need help?
General
