What's in the box
1
FROM STB
microSD card slot
Network status indicator
Power inputSPDIF
TO TV
USB port
2
HDMI
HDTV
Power adapter
(Support 720p or higher)
> microSD card slot: Holds a microSD card to expand your M220's storage space.
> SPDIF:Connects to the audio system using an SPDIF cable.
> USB port: Connects to a mouse, keyboard, fl ash drive, or other USB device.
> FROM STB: Connects to an HDMI source device, such as a set-top
box (STB) or
Blue-ray player.
The figures in this guide are for your reference only. The actual products may vary.
Power cable
HDMI cable
HDMI
Connecting cables
Remote control
SMART OTT BOX (M220)
3
Extension connections
LAN input
Power indicator
Switch to the STB/
Go back to M220
Play/Pause
Picture-in-picture
Standby/Wake up
Menu
OK
Home
Back
Search
Volume down/up
HDMI cable
Ethernet
cable
1 HDMI cable1 Power adapter
1 Power cable
Optional Optional
Next Steps
1
Turn on your TV and switch the TV to HDMI input using the TV remote control.
The M220's home screen is then displayed on the TV.
2
Follow the on-screen instructions.
Reference
The following table lists how the indicators behave. If the indicators do not behave as
expected, ensure that everything is plugged in correctly.
Router
IR receiver
HD set-top box
After being connected to a power supply, your M220 automatically powers on.
Source
(Or use a wireless
internet connection)
LED Color Status Description
Power
Indicator
Blue Steady Working properly.
Red Steady Starting or in sleep mode.
Network
status
indicator
Blue Steady Connected to a network.
Red
Steady Disconnected from the network.
Blinking quickly Restoring to factory settings or updating.
Blinking slowly Failure.
IR transmitter
Press to open
the battery cover.
Remove the
insulating material.
1
2
1 button cell battery (CR2025,3V)
Navigation
To Next Page
Need help?
General
