Thank you for choosing Mobile Broadband from
Three.
This Set-up guide shows you what your new dongle looks like, how to insert your
SIM and get started.
Getting to know your dongle.
USB Connector
This connects the dongle to the USB port on a PC, Mac or laptop.
Strap Hole
You can tie the cap and the dongle together by threading a strap through the strap
holes.
Indicator Light
This indicates current status of the dongle.
Green, blinking twice every 3 seconds: The dongle is on and has power.
Blue, blinking once every 3 seconds: The dongle is registering with a 3G/3G+
network.
Blue, solid: The dongle is connected to a 3G network.
Cyan, solid: The dongle is connected to a 3G+ network
microSD Card Slot
This holds a microSD card. The microSD card is a card that can be used for storing
files and content.
SIM/USIM Card Slot
It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module
(USIM) card.
Getting Your Dongle Ready
Installing the SIM/USIM card
1. Slide the back cover to remove it from the dongle.
2. Insert the SIM/USIM card into the dongle as shown below.
3. Replace the backe cover and slide it into place.
To Next Page
Need help?
General
