Connecting Cables
6
It is recommended that the ATN 910C-K chassis use Ethernet cables
crimped onsite.
Bundle the network cables in a rectangle shape. Ensure that the cable
ties are evenly spaced and face the same direction.
Before bundling network cables, use a network cable tester to test cable
connectivity.
In a 300 mm deep cabinet with a flat door, common shielded network
cables are not recommended when electrical modules are used. Instead,
use Huawei-customized conversion short pigtail shielded network
cables.
NOTE
Installing Ethernet Cables
To Next Page
Loading...
Need help?
General
