2
Installing an Inverter (support-mounting is used as an example)
1. The antitheft lock is prepared by customers.
2. For details about wall-mounting the device, see the
SUN2000 (8KTL-28KTL) User Manual.
1. Determine the hole positions on the support
based on rear panel dimensions.
2. Drill holes.
3. Secure the rear panel. 4. Mount the inverter on the rear panel.
5. Tighten hexagon bolts.
6. (Optional) Install an anti-theft lock.
M10 (3 PCS)
30 N·m
Unit: mm
To Next Page
Loading...
Need help?
General