X2
™
IRRIGATION CONTROLLER QUICK START PROGRAMMING GUIDE
Main Display
Dial Must Be in RUN Position for Automatic Irrigation
Setting Current Date and Time
1. Turn the dial to the DATE/TIME position.
2. The current year will be ashing. Use the + and - buttons to change
the year. Push the ► button to proceed to setting the month.
3. The month will be ashing. Use the + and - buttons to change
the month. Press the ► button to proceed to the day setting.
4. The day will be ashing. Use the + and – buttons to change the
day of the month. Press the ► button to proceed to the time setting.
5. The time will be displayed. Use the + and – buttons to select
AM, PM, or 24 HR to display all times in 24-hour mode.
6. Press the ► button to move to hours. Use the + and - buttons to
change the hour shown on the display.
7. Press the ► button to move on to minutes.
Use the + and - buttons to change the minutes shown in the display.
Turn the dial to the RUN position. Date and time are now set.
Setting Program Start Times
1. Turn the dial to the START TIMES position.
2. Press the PRG button to select A, B, or C.
3. Use the + and - buttons to change the start time. The start time
advances in 15-minute increments.
4. Press the ► button to add another start time, or PRG button to
set a start time for the next program.
Eliminating a Program Start Time
With the dial set to the START TIMES position, push the + and - buttons
until you reach 12:00 AM (midnight). From this position, push the - button
once to reach the “OFF” position.
Program Indicator
Station Running
Sprinkler O Days
Start Time Symbol
Run Time Symbol
Month Symbol
Day Symbol
Rain Sensor Active/Override
Bluetooth
®
On
Wi-Fi On
Days of the Week
Odd/Even/Interval Days
Time Mode (AM/PM/24 HR)
Seasonal Adjust (%)
Control Buttons
Sensor Bypass Switch
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG Inc.
and any use of such marks by Hunter Industries is under license.
X2 dial and button functions are disabled when Wi-Fi is on,
as well as the existing schedule and settings. All programming
is managed from the Hydrawise™ online soware. Manual
Station, Manual Program, and Test All Stations can be
activated at the controller.
https://hunter.direct/WAND
ADD
WI-FI
|For more information visit Thelandscapestore.com.au | (02) 9161 3939 |
To Next Page
Need help?
General
