CAUTION:
Two people are recommended for assembly.
CAUTION: Do not over tighten the bolts.
A
D
AA
Attaching the casters
□ Be sure the drawers are locked and lay the cabinet (A)
□ emas eht no ,tinu eht ot )D( sretsac leviws eht hcattA
side as the handle, inserting bolts (AA) through the swivel
casters(D) and into the cabinet (A).
□ Tighten with supplied hex key (CC) or 12 mm wrench/socket.
□ Repeat this process for the
xed casters (C) on the
opposite side of the cabinet (A).
□ Return the cabinet (A) to its upright position.
2
Assembly
5
HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
□
□
A
BB
B
NOTE:
One handle comes with this cabinet and can be
installed on either the left or right side. If a second
handle is desired, please call 1-888-HD-HUSKY to order.
To Next Page
Loading...
Need help?
General
