To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Husqvarna 120 Mark II and is the answer not in the manual?
General| Engine Power | 1.4 kW |
|---|---|
| Cylinder Displacement | 38.2 cm³ |
| Chain Speed at Max Power | 16.8 m/s |
| Chain Pitch | 3/8" |
| Sound Power Level | 113 dB(A) |
| Fuel Tank Volume | 0.25 liters |
| Bar Length | 35 cm (14 in) |
| Weight | 4.85 kg (10.7 lbs) without cutting equipment |
| Bar Length Range | 35-40 cm (14-16") |
A visual guide to the chainsaw's components and labels.
Explains various safety symbols used on the product and their meanings.
Outlines conditions under which the manufacturer is not liable for damages.
Defines the severity levels for signal words like WARNING and CAUTION.
Provides essential guidelines for the safe use and maintenance of the product.
Specific safety rules to follow during the operation of the chainsaw.
Explains different forces affecting safe control and how to prevent them.
Details the required PPE for operating the chainsaw safely.
Essential safety precautions related to handling and using fuel.
Safety guidelines to follow before performing maintenance tasks.
Step-by-step instructions for attaching the guide bar and saw chain.
Procedure to unlock the chain brake if the clutch cover was removed.
Information on the correct type and ratio of fuel mixture for the engine.
Detailed steps for preparing the fuel mixture.
Steps for safely filling the fuel tank with the prepared mixture.
Instructions for filling the chain oil tank for lubrication.
Procedure for starting the engine when it is cold.
Procedure for starting the engine when it is already warm.
How to safely shut down the chainsaw's engine.
Instructions on using the spiked bumper for cutting stability.
Detailed steps for safely felling a tree.
How to remove branches from a felled tree.
Instructions for cutting logs into smaller sections.
An overview of recommended maintenance intervals.
Routine checks and cleaning to be performed daily.
Maintenance tasks to be performed weekly.
Maintenance tasks to be performed monthly.
Procedure for inspecting and maintaining the spark plug.
Steps for cleaning the chainsaw's air filter.
Guide on how to sharpen the saw chain for optimal performance.
How to adjust the depth gauge for optimal cutting.
Instructions for properly tensioning the saw chain.
Procedure to verify the saw chain is receiving adequate lubrication.
Guidelines for safely transporting the chainsaw.
Instructions for safely storing the chainsaw for short or long periods.
Specifications and measurements for the chainsaw.
Approved combinations of guide bars and saw chains for the product.
Details on filing angles and specific saw chain combinations.
