Husqvarna 122HD45 User Manual

KEY T O SYMBOLS
2 – English 1153993-49 Re v 2.
2012-03-21
Symbols
W ARNING! Incorrect or careless use of a
hedge tr
immer can turn it into a
dangerous tool that can cause serious or
even fatal injury. It is extremely important
that you read and understand the
contents of this operator’s manual.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved hearing protection
• Approved eye protection
Always wear approved protective gloves.
Wear sturdy, non-slip boots or shoes.
Starting instructions See
the instr
uctions under the
heading Start and stop.
Other symbols/decals on the machine refer to special
cer
tification requirements for certain markets.
The engine is s witched off by moving the
stop s
witch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark
plug when assembling, checking and/or
performing maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
rn.

Husqvarna 122HD45 Specifications

General

Engine Displacement	21.7 cm³
Power Output	0.6 kW
Maximum Power Speed	7800 rpm
Blade Length	45 cm
Knife Teeth Opening	28 mm
Weight	4.7 kg
Engine Type	2-stroke
Fuel Tank Volume	0.3 liters