English--- 23
115374027 Rev. 5 5/15/12
TECHNICAL DATA
Model 128LDX (M10 LH arbor shaft thread)
Approved accessories T y pe Cutting attachment / guard, part. no.
Trimmer head T25 537 33 83--06 / 545 030 901
Plastic blades T ricut 300 mm 531 00 38--11 / 545 030 901
Attachments Part. no.
Cultivator attachment with shaft 952 711 907 / 537 42 54--01
Edger attachment with shaft 952 711 908 / 537 19 69--01
Blower attachment with shaft 952 711 911
Pruner attachment with shaft 952 711 916 / 537 18 33--16
Clean sweep attachment with shaft 537 19 67--01
Hedge trimmer attachment with shaft 537 19 66--05 / 537 19 66--06
Trimmer attachment 537 35 35--01
Technical data
128LDX
Engine
Cylinder volume, cu.in./cm
3
1.7/28
Cylinder bore, inch/mm 1.4/35
Stroke, inch/mm 1.130/28.7
Idle speed, rpm 2,800--3,200
Recommended max. speed, rpm 11,000
Speed of output shaft, rpm 8,000
Max. engine output, acc. to ISO 8893, hp/kW 1.1/0.8
Catalytic converter muffler Yes
Speed--regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro/CD
Spark plug ChampionRCJ--8Y
Electrode gap, inch/mm 0.024/0.6
Fuel and lubrication system
Manufacturer/type of carburetor Zama
Fuel tank capacity, US pint/liter 0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, lbs/kg 11/5.0
Sound levels
(see note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3--1997, dB(A),
min/max: 94/97
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3--1997, m/s
2
At idle, left/right handles: 3/5
At max. speed, left/right handles: 9/8
NOTE! This spark ignition system complies with the Canadian standard ICES--002.
The accessories used in combination with the specified powerheads have been evaluated
to applicable ISO-- and EN safety requirement standards by the Swedish Machinery Test-
ing Institute:
These attachments used in combination with the specified powerhead have been evaluated
to ANSI B175.3--2003, “Grass Trimmers and Brushcutters -- Safety Requirements”. These
combinations have been evaluated by Underwriter’s Laboratories Inc. (UL) and are conse-
quently UL listed: