Technical data
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.
Motor
Cylinder displacement, cu.in/cm
3
Cylinder bore, inch/mm 1, /3 ,0 1, /3 ,0
Stroke, inch/mm 1,06/27 1,06/27
Idle speed, rpm
2800-3200
Recommended max. speed, rpm 00
Speed of output shaft, rpm
00
Max. engine output, acc. to ISO 8893, kW/ rpm 0,
/ 00 0, / 00
Catalytic converter muffler Yes Yes
Speed-regulated ignition system
Emissions Durability Period according to California Air Resources
Board, h.
50 50
Ignition system
Spark plug NGK CMR6A NGK CMR6A
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/cm
3
0,72/343 0,72/343
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 10,1/4,6 11,4/5,2
8500
8500
1,68/27,6 1,68/27,6
2800-3200
Approved accessories Type Cutting attachment / guard, part. no.
Trimmer head T25 537 33 83-06 / 545 030 901
Plastic blades Tricut 300 mm 531 00 38-11 / 545 030 901
Model 129 LDX / 129 LK (M10 LH arbor shaft thread)
Attachments Part. no.
Grass blade/grass cutter kit 952 715 616
Cultivator attachment with shaft 952 711 907 / 537 42 54-01
Edger attachment with shaft 952 711 908 / 537 19 69-01
Blower attachment with shaft 952 711 911
Pruner attachment with shaft 952 711 916 / 537 18 33-16
Clean sweep attachment with shaft 537 19 67-01
Hedge trimmer attachment with shaft 537 19 66-05 / 537 19 66-06
Trimmer attachment 537 35 35-01
To Next Page
Loading...
Need help?
General
