Husqvarna 13 User Manual

6 – English
6003-006
8011-292
WARNING!
You must use approved personal protective equipment whenever you use the ma-
chine. Personal protective equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen. Ask your dealer for help in
choosing the right equipment.
• Take care when rounding a fixed object, so that
the blades do not hit it. Never run the machine
over foreign objects.
• Only use the machine in daylight or in other
well-lit conditions. Keep the machine at a safe
distance from holes or other irregularities in the
ground. Pay attention to other possible risks.
• Never use the machine if you are tired, if you
have consumed alcohol, or if you are taking
other drugs or medication that can affect your
vision, judgment or co-ordination.
• Keep an eye on the traffic when working close to
a road or when crossing it.
• Never leave the machine unsupervised with the
engine running. Always stop the blades, apply
the parking brake, stop the engine and remove
the keys before leaving the machine.
• Never allow children or other persons not
trained in the use of the machine to use or
service it. Local laws may regulate the age of
the user.
SAFETY INSTRUCTIONS
WARNING!
Engine exhaust, some of its
constituents and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive impairment. The
engine emits carbon monoxide,
which is a colourless, poisonous
gas. Do not use the machine in
enclosed spaces.
• Make sure that you have first aid equipment
close at hand when using the machine.
• Never use the machine when barefoot. Always
wear protective shoes or protective boots,
preferably with steel toes.
• Wear approved protective glasses or full-face
visor during assembly and when operating.
• Never wear loose fitting clothes that can catch in
moving parts.
Keep children away from the area to be mowed.
Personlig skyddsutrustning.

Husqvarna 13 Specifications

General

Brand	Husqvarna
Model	13
Category	Lawn Mower
Language	English

Summary

Safety Instructions

General Safety Precautions

General Use Guidelines

Covers essential operating practices and safety rules for general use of the machine.

Child Safety and Maintenance Precautions

Child Safety

Important safety measures to protect children around the machine.

Maintenance Safety

Safety guidelines to follow when performing maintenance on the machine.

Slope Operation Safety

Driving on Slopes

Detailed instructions and warnings for safely operating the machine on slopes.

Transport and Operational Safety

Transport Safety

Safety considerations and procedures for transporting the machine.

Driving Procedures

Before Starting the Machine

Steps to take before starting the engine, including safety and maintenance checks.

Starting the Engine

Detailed steps for starting the engine on different Rider models.

Engine Starting Procedures

Starting a Cold Engine

Procedure for starting the engine when it is cold, using the choke.

Starting a Warm Engine

Procedure for starting the engine when it is already warm.

Operating the Machine

Driving the Machine

Instructions on how to drive the machine, including pedal and gear operations.

Mowing and Cutting Tips

Cutting Tips

Advanced Driving and Stopping

Hill Start Procedure (Manual Gearbox)

Steps for starting the machine on a slope with a manual gearbox.

Stopping the Engine

Procedure for safely stopping the engine on different Rider models.

Maintenance Schedule and Overview

Maintenance Schedule

A schedule outlining maintenance tasks and their intervals based on hours or time.

Steering System Maintenance

Checking and Adjusting Steering Wires

Brake System Maintenance

Checking and Adjusting Brakes (Rider 11/11 Bio)

Procedure to check and adjust the brake system on Rider 11 and 11 Bio models.

Checking and Adjusting Brakes (Rider 13/13 Bio)

Procedure to check and adjust the brake system on Rider 13 and 13 Bio models.

Throttle and Fuel System Maintenance

Throttle Wire Adjustment

Fuel Filter Replacement

Air Filter Maintenance

Replacing the Air Filter

Safety System Inspection

Inspecting the Safety System

Checks to ensure the machine's safety systems for starting and driving are functioning correctly.

Cutting Unit Adjustment and Parallelism

Cutting Unit Ground Pressure Adjustment

Procedure to adjust the cutting unit's ground pressure for best cutting results.

Checking Cutting Unit Parallelism

How to check and ensure the cutting unit is parallel for even mowing.

Cutting Unit Alignment Adjustment

Cutting Unit Parallelism Adjustment (Rider 11/13 Bio)

Steps to adjust the cutting unit's parallelism on Bio models.

Cutting Unit Alignment Adjustment (Rider 11/13 Bio)

Procedure to adjust the cutting unit's alignment on Bio models.

BioClip 90 Service Position

Service Position for BioClip 90

Placing Cutting Unit in Service Position

Blade Maintenance and Replacement

Checking the Blades

Replacing the Break-pin (BioClip)

Engine Lubrication

Checking Engine Oil Level

Changing Engine Oil

Troubleshooting Guide

Engine Start Issues

Common problems and procedures when the engine fails to start or turn over.

Engine Running Problems

Further Troubleshooting

Engine Overheating and Battery Charging

Machine Vibrations and Uneven Mowing

Storage and Service Recommendations

Winter Storage Procedure

Annual Service