Husqvarna 250R User Manual

English – 9
WHA T IS WHA T?
What is what on the c learing saw? (265RX)
24
25
23
27
20
21
4
19
17
18
1
22
12
13
11
15
14
10
9
8
5
3
1
2
6
16
7
26
4
1 Blade
2 Grease filler cap, bevel gear
3 Bevel gear
4 Cutting attachment guard
5 Shaft
6 Handlebar
7 Throttle control
8 Stop switch
9 Throttle lockout
10 Support eyes for harness
11 Cylinder cover
12 Starter handle
13 Fuel tank
14 Choke control
15 Air filter
16 Handle adjustment
17 Locking nut
18 Support flange
19 Drive disc
20 Socket spanner
21 Operator’s manual
22 Transport guard
23 Allen key
24 Carburettor screwdriver
25 Locking pin
26 Harness
27 Gearbox grease

Husqvarna 250R Specifications

General

Brand	Husqvarna
Model	250R
Category	Trimmer
Language	English

Summary

WHAT IS WHAT?

GENERAL SAFETY PRECAUTIONS

Important Safety Guidelines

General safety rules and advice for operating the machine safely.

Machine Safety Features

Explanation and checks for the machine's safety features like throttle lockout and stop switch.

Cutting Attachment and Muffler Safety

Guidance on cutting attachment guards, vibration damping, quick release, and muffler safety.

Cutting Equipment and Maintenance

Guidance on choosing, maintaining, and sharpening cutting equipment.

Blade and Trimmer Head Sharpening

Instructions for sharpening saw blades and maintaining trimmer heads.

Personal Protective Equipment (PPE)

Details on required PPE including helmet, hearing, and eye protection.

ASSEMBLY

Harness and Clearing Saw Adjustment

Instructions for adjusting the harness and clearing saw for proper use.

Harness Adjustment and Balance

Step-by-step guide to adjusting the harness for comfort, balance, and correct posture.

Assembling the Cutting Equipment

Instructions and warnings for assembling cutting attachments.

FUEL HANDLING

Fuel Safety and Storage

Important safety precautions for handling, transporting, and storing fuel.

Fueling Precautions

Detailed instructions and warnings for safe refueling procedures.

Fuel Types and Mixing

Information on gasoline types, two-stroke oil, and mixing ratios.

STARTING AND STOPPING

Pre-Start Checks and Cold Starting

Essential checks before starting and procedures for cold engine starting.

Engine Starting and Stopping Procedures

Detailed steps for safely starting and stopping the engine.

WORKING TECHNIQUES

General Working and Safety Rules

Clearing Methods and Blade Safety

Trimmer Head Techniques

MAINTENANCE

Carburetor Adjustment and Settings

Carburetor Jet Adjustment Procedures

Air Filter and Bevel Gear Maintenance

Spark Plug Maintenance

Maintenance Schedule

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

Warranty Rights and Obligations