EC Declaration of Conformity
Husqvarna AB, 561 82 Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category............................Petrol Lawnmower
Type(s) ...........................540, 540D
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC (until 28.12.09), 2006/42/EC (from 29.12.09), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN 836, EN ISO 14982, EN ISO 20643, EN ISO 3744, EN ISO 11201
The maximum A w
eighted sound pressure level L
pA
at the operator’s position, recorded on a sample of the above product(s) cor-
responds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s)
corresponds to the Value
a
h
given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Newton Aycliffe 29/10/2009
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
Keeper of technical documentation
The power rating of the engine(s) indicated is the average net power output (at specified rpm) of a typical production engine for
the engine model measured to SAE standard J1349 / ISO 1585. Mass production engines may differ from this value. Actual en-
gine power for the engine installed in the final machine will depend on the operating speed, environmental conditions and other
variables
Husqvarna UK LTD.
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - 01325 302302 Fax - 01325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
5229601-02
Ty pe
Width of Cut (cm)
Nominal Power kW
Measured Sound Power L
WA
(dB(A))
Guaranteed Sound Power L
WA
(dB(A))
Level (dB(A))
Value a
h
(m/s
2
)
Uncertainty K of a
h
(m/s
2
)
Weight (Kg)
540D
40
1.9
95
96
81
5
1.5
23
540
40
1.9
95
96
81
5
1.5
21