To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...How to fix a flashing green activate LED on a Husqvarna LC 141VLi Lawn Mower?
If the green activate LED is flashing on your Husqvarna Lawn Mower, it indicates low battery voltage. To resolve this, charge the battery.
What does it mean when the error LED flashes on my Husqvarna Lawn Mower?
If the error LED is flashing on your Husqvarna Lawn Mower, it could be due to a weak battery. Try charging the battery. Also, the temperature in the work environment may be too high or too low; use the battery in temperatures between -10°C and 40°C. Overvoltage could also be the cause, so check that the mains voltage matches the rating plate on the product. If none of these issues apply, remove the battery from the charger, wait 5 seconds, and try charging again. If the problem persists, consult an authorized service agent.
What to do if the Error LED flashes on my Husqvarna Lawn Mower and the battery is discharged?
If the Error LED flashes on your Husqvarna Lawn Mower and the battery is discharged, charge the battery.
How to fix a flashing green LED on a Husqvarna LC 141VLi Lawn Mower?
If the green LED is flashing on your Husqvarna Lawn Mower, it means the battery voltage is low. Charge the battery.
What to do if the Error LED flashes on my Husqvarna LC 141VLi?
If the Error LED flashes on your Husqvarna Lawn Mower, it could be due to several reasons: * **Overload:** Increase the cutting height. * **Motor control overheated:** Switch off the motor and wait for it to cool down. * **Blade blocked:** Turn the safety key to '0', remove the battery, wait at least 5 seconds, and ensure the blade can rotate freely. If the problem continues, contact an authorised service agent. * **Battery error or no signal:** Check the battery is correctly inserted and examine the battery connector. If the error LED flashes on the battery, refer to the battery troubleshooting section.
General| Brand | Husqvarna |
|---|---|
| Model | LC 141VLi |
| Category | Lawn Mower |
| Language | English |
Definitions for warnings, cautions, and notes used in the manual to highlight important information.
Essential guidelines and precautions for safe operation and product use.
Rules and precautions for operating the product safely, including environmental and situational awareness.
Specific instructions for operating the product safely, including starting, stopping, and handling.
Recommended protective gear to minimize injury risk during operation and maintenance.
Information on product safety features like the cutting cover and motor brake handle.
Crucial safety guidelines for handling, charging, and using batteries and chargers.
Safety precautions for using the power cord on the LC 141C model to avoid electrical hazards.
Safety precautions to follow before and during product maintenance to prevent accidents.
Step-by-step guide for blade removal, replacement, and proper tightening.
