Hyd-Mech 393298 User Manual

1
THANK YOU,
On behalf of everyone at HYD
.
MECH, we would like to thank and congratulate you on your decision to purchase a
HYD
.
MECH band saw.
Your new machine is now ready to play a key role in increasing the efciency of your operation, helping you to reduce
cutting costs while boosting quality and productivity.
To ensure you are maximizing the power and versatility of your new HYD
.
MECH band saw, please take the time to
familiarize yourself and your employees with the correct operation and maintenance procedures as outlined in this
manual.
We sincerely appreciate the condence you have demonstrated in purchasing our product and look forward to building a
long and mutually benecial relationship.
Thank-you.
HYD
.
MECH GROUP LIMITED
P.O. BOX 1659
Woodstock, Ontario Canada, N4S 0A9
Phone: (519) 539-6341
Service 1-877-237-0914
Sales 1-877-276-SAWS(7297)
Fax (519) 539-5126
e-mail, info@hydmech.com
Printed NOVEMBER 2009
S20A NA
2008
393298

Hyd-Mech 393298 Specifications

General

Brand	Hyd-Mech
Model	393298
Category	Saw
Language	English

Summary

Safety Instructions

Safety Summary and Basic Rules

A brief overview of the safety section and fundamental guidelines for safe machine operation.

Owner and Operator Responsibilities

Outlines the duties of the machine owner and personnel for safe operation and maintenance.

Understanding Safety Hazard Labels

Identification, meaning, and location of all safety hazard labels on the machine.

Installation Procedures

Installation Safety and Lifting Guidelines

Essential safety measures and procedures for safely lifting and positioning the bandsaw.

Foundation, Grounding, and Wiring

Requirements for machine installation, including foundation, electrical grounding, and power connections.

Hydraulic and Cutting Fluid Information

Details on the types and specifications of hydraulic oil and cutting fluid required for operation.

Operating Instructions

Control Panel and Console Overview

Introduction to the control panel, console, and their primary functions for operating the saw.

Machine Start-up and Basic Operation Controls

Steps for starting the machine, using emergency stop, and basic operational buttons like RESET and BCM.

Head, Vise, and Shuttle Controls

Instructions for operating head movement, both fixed and shuttle vises, and shuttle functions.

Operational Modes and Cycle Management

Explanation of MANUAL, AUTO modes, CYCLE PAUSE, COOLANT AUTO, CYCLE START, and BLADE STOP functions.

Automatic Mode Setup and Types

Guide to setting head limits, programming jobs, queues, blade kerf, and understanding automatic mode types.

Blade Change Mode (BCM) Procedure

Detailed steps for entering and performing blade changes using the BCM function.

Maintenance and Troubleshooting

Safety Procedures and Lock-out

Essential safety protocols for maintenance, including lock-out/tag-out procedures.

Machine Restoration and Blade Changing

Steps to safely restore the machine after maintenance and the procedure for changing the saw blade.

Adjustments and Lubrication Procedures

Guides for adjusting blade tracking, guides, tension, and lubrication points for machine upkeep.

Fluid Maintenance and Cleanliness

Procedures for managing hydraulic oil levels, changes, and maintaining machine cleanliness.

Parameter Definitions and Controller Troubleshooting

Explanation of machine parameters and troubleshooting for MEP31/MEP32 controller issues.

Fuse Checks and Common Error Diagnosis

Troubleshooting guide for blown fuses and common issues like no display or blade speed problems.

Machine Alarms and Troubleshooting

Interpretation of machine alarm messages and diagnostic steps for various errors.

Electrical Systems

Electrical Schematics Reference

Information directing users to PDF schematics on an attached CD for electrical details.

Hydraulic Systems

Hydraulic Schematics Reference

Information directing users to PDF schematics and diagrams on an attached CD.

Mechanical Assemblies

Mechanical Drawings and Parts List Reference

Information directing users to PDF drawings and parts lists on an attached CD.

Options

Optional Assembly Drawings Reference

Information directing users to PDF drawings for optional machine configurations.

Specifications

S20A Bandsaw Specification List

Detailed technical specifications for the S20A bandsaw model.

S20A Layout Drawing

Visual representation of the machine's dimensions and layout.

Warranty Information

S20A Bandsaw Warranty Details

Information regarding the warranty coverage, terms, and conditions for the S20A bandsaw.