Hyd-Mech S23A - User Manual

1
THANK YOU,
On behalf of everyone at HYD·MECH Group Limited, we would like to thank and congratulate you on your decision to
purchase a HYD·MECH bandsaw.
Your new machine is now ready to play a key role in increasing the e󰀩ciency of your operation, helping you to reduce cost
while boosting quality and productivity.
To ensure you are maximizing the power and versatility of your new HYD·MECH bandsaw, please take the time to
familiarize yourself and your employees with the correct operation and maintenance procedures as outlined in this
manual. Please keep this instruction manual for future reference in a known location and easily accessible to all users of
the device.
HYD·MECH o󰀨ers a great variety of options, components, and features for its various models. Therefore, some of the
equipment described in this manual (various illustrations and drawings) may not be applicable to your particular machine.
The information and specications provided in this manual were accurate at the time of printing. HYD·MECH reserves the
right to discontinue or change specications or design at any time without notice and without incurring any obligation.
Thank you.
Hyd·Mech Group Limited
P.O. Box 1659, 1079 Parkinson Road
Woodstock, Ontario, N4S 0A9
Phone : (519) 539-6341
Service : 1-877-237-0914
Sales : 1-877-276-SAWS (7297)
Fax : (519) 539-5126
e-mail : info@hydmech.com
Printed MARCH 2016
S23A
393359

Hyd-Mech S23A Specifications

General

Brand	Hyd-Mech
Model	S23A
Category	Saw
Language	English

Summary

Safety Instructions

Basic Rules

Owner Responsibilities

Operator and Maintenance Personnel Responsibilities

Safety Hazard Labels

Identification and understanding of machine safety labels and their importance.

Installation Guide

Installation Safety Precautions

Foundation, Levelling and Anchoring

Earth Grounding Procedure

Steps for properly grounding the machine for electrical safety.

Power Wiring Connections

Procedures for connecting the machine to the power supply.

Operating Instructions

Operator Control Panel

Start-Up Procedures

Control Console Details

Hydraulic Feed Control

Starting the Machine

Making a Cut in Manual Mode

Detailed procedure for performing a cut using the manual operation mode.

Executing a Single Job in Automatic Mode

Steps to set up and run a single job using the automatic mode.

Executing a Queue of Jobs in Automatic Mode

Procedure for programming and running multiple jobs sequentially in automatic mode.

Maintenance and Troubleshooting

Safety During Maintenance and Troubleshooting

Safety protocols to follow before and during maintenance or troubleshooting activities.

Lock Out Procedure

Step-by-step guide for safely locking out the machine before maintenance.

Blade Changing Procedure

Detailed steps for safely removing and replacing the bandsaw blade.

Blade Tracking Adjustment

Lubrication Points

Hydraulic Maintenance

Troubleshooting Length Inaccuracies

Identification and resolution of common operational issues like length inaccuracies.

Machine Alarms

Explanation of various machine alarms, their codes, and their meanings.

Specifications

S23 A Bandsaw Specifications

Detailed technical specifications for the S23A bandsaw model.