Hypontech HMS-600W-C User Manual

Torque:9N·m
2.
Installing
1. Solar panel
2. M8 screws(prepared by the installer-self)
3. AC to power plug cable/Female AC Plug (Optional)
Product Overview
1.
Dimension: 230 x 190 x 46.5mm
HMS-600W-C/HMS-800W-C
2.1 Installation Requirements
1. Please install the inverter in places that can avoid
inadvertent contact.
2. The inverter should not be installed near inflammable
or explosive objects.
Direct
Sunlight
Rain
Exposure
Snow
Lay up
AVOID
Note:
1. Install the inverter and all DC connections
under the PV module to avoid direct sunlight,
rain exposure , snow buildup, UV, etc.
2. Leave enough space around the inverter enclosur e
to ensure ventilation and heat dissipation.
2.2 Mounting
1. Mark the position of each microinverter on the rail, according to the PV module layout.
2. Fix the screw on the rail.
3.Mount microinverter at each of these locations and tighten the screws.
2.3 AC Connection
1 ). AC to power plug cable
1. Insert the AC into the AC connector to power plug cable
of the micro inverter until it clicks.
2. Connect the AC to the local grid to power plug cable
network.
1
2 3
2 ). Female AC Plug
L
N
PE
2 2
Insert the conductor(4mm /6mm ) into a suitable ferrule acc. to DIN 46228-4
and crimp
Insert the crimped conductors L, N and PE into corresponding terminals and
tighten the screws (torque 1.4N·m)
L
PE
N
12 m m30 m m
2 2
4m m /6mm
LN
PE
1
H838-00106-01

Hypontech HMS-600W-C Specifications

General

Brand	Hypontech
Model	HMS-600W-C
Category	Solar panel
Language	English