FEATURES OF YOUR HYUNDAI
1- 38
B660B01S-AAT
To Set the Cruise Speed
1. Push in the cruise control main switch. This
turns the system on.
2. Accelerate to the desired cruising speed
above 25 mph (40 km/h).
3. Push the control switch at the end of the
windshield wiper and washer control lever to
"SET (COAST)" and release it. The
"CRUISE" indicator light in the instrument
cluster will illuminate after you have set the
vehicle speed at the desired speed.
4. Remove your foot from the accelerator pedal
and the desired speed will automatically be
maintained.
5. To increase speed, depress the accelerator
pedal enough for the vehicle to exceed the
preset speed. When you remove your foot
from the accelerator pedal, the vehicle will
return to the speed you have set.
STA1700B
B660A01S-AAT
CRUISE CONTROL (If installed)
The cruise control system provides automatic
speed control for your comfort when driving on
freeways, tollroads, or other noncongested high-
ways. This system is designed to function above
approximately 25 mph (40 km/h).
B660A01F
B571A01O
B990A01Y-AAT
Car Mat Anchor
To use a car mat on the front side floor carpet,
make sure it fixes to the car mat anchor in your
vehicle.
This keeps the car mat from sliding forward and
possibly interfering with the movement of the
pedals.
CAUTION:
o Make sure the car mat is properly placed
on the floor carpet. If the car mat slips
and interferes with the movement of the
pedals during driving, It may cause an
accident.
o Don't put a additional car mat on the top
of the fixed mat, otherwise the additional
mat may slide forward and interfere with
the movement of the pedals.
To Next Page
Need help?
General
